Yocan Evolve 3 in 1 Vaporizer Yocan

Powering the Yocan Evolve 3-in-1 Vaporizer

1. Fully charge the Yocan Evolve 3-in-1 Vaporizer before using.
2. After fully charging the battery, click the power button 5 times to turn on the vaporizer, It is located at the middle part of the battery.
3. You can now begin sterilizing the dry herb and wax coils once you have powered on the Yocan Evolve 3-in-1 Vaporizer. Press and hold the power button for 5 seconds, repeat this process 2 or 3 times. The reason for this process is to remove any impurities from the heating chamber.
4. After sterilizing the vaporizer, Let it rest for about 2-3 minutes and then you can start loading your desired essentials onto your Yocan Evolve 3-in-1 Vaporizer.

How to Load the Yocan Evolve 3-in-1 Vaporizer Wax Atomizer

1. Remove the mouthpiece by twisting it counter clockwise to expose the coil.
2. Remove the coil cap by twisting it counter clockwise to expose the heating chamber.
3. Load your desired amount of concentrates onto the coil. When loading, avoid touching the coils with the dab tool as it may damage the coils.
4. Place the coil cap by twisting it clockwise.
5. Place the mouthpiece by twisting it clockwise. Do not overtighten the coil caps or mouthpiece as it may damage the threading.

How to Load the Yocan Evolve 3-in-1 Vaporizer Herb Atomizer

1. Prepare your dry herb. You can use a grinder to grind your herbs into smaller pieces for better results.
2. Remove the mouthpiece by twisting it counter clockwise to reveal the heating chamber. The herb atomizer does not have a cap like the other atomizers.
3. Load the chamber with the ground herbs. Do not pack your chamber tight as you may find it difficult to inhale the vapor.

How to Vape the Yocan Evolve 3-in-1 Vaporizer

1. After the vaporizer is fully charged and loaded, press and hold the power button to start generating vapor and draw from the mouthpiece.
2. Repeat this process until all materials are completely consumed.

Cleaning and Maintaining your Yocan Evolve 3-in-1 Vaporizer

The Yocan Evolve 3-in-1 Vaporizer is easy to clean and maintain. Assembling and disassembling the parts of the vaporizer is also easy. To do this follow the steps below;

1. Turn on the vaporizer by clicking the power button 5 times repeatedly.
2. Turn the vaporizer upside down and start holding the power button to vaporizer or remove residue inside the coil. This makes the cleaning process easier.
3. Let the Yocan Evolve 3-in-1 Vaporizer to cool down.
4. Disassemble all threaded connections by twisting each part counter clockwise.
5. Remove the mouthpiece to have access to the coils and brush it off with the cleaning tool included in the kit.