Yocan Hive 2.0 Vaporizer Yocan

Powering the Yocan Hive 2.0 Vaporizer

1. Charge your Yocan Hive 2.0 Vaporizer before use to ensure best results.
2. Once you have fully charged the battery, you can proceed by turning the vaporizer battery on by tapping the power button 5 times. Note: The power button is the square button located at the upper part of the battery facing sideways.

How to Load the Yocan Hive 2.0 Vaporizer Concentrate Atomizer

1. Place your concentrates on an area where you can easily and safely scoop it for loading. You can use a non-stick paper, a glass jar, or any clean container.
2. Remove the wax concentrate chamber by holding and gently pulling it upwards, Separate it from the magnetic adapter by twisting it. This will separate the chamber from the battery itself and will allow you to easily load the wax concentrate atomizer.
3. Open the atomizer coil by removing the bottom part of the concentrate atomizer chamber.
4. Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates.
5. Put together the bottom part by screwing it back clockwise. Note: do not overtighten the threads as it may damage it and cause it to be loose altogether.
6. Re-install the magnetic adapter.
7. Put the concentrate atomizer back to the battery.

How to Load the Yocan Hive 2.0 Vaporizer E-Liquid Atomizer

1. Put your liquids in an area where you can easily get them when you load the e-liquid chamber.
2. Remove the e-liquid chamber by holding and gently pulling upwards, Separate it from the magnetic adapter by twisting it. This will separate the chamber from the battery itself and will allow you to easily load the e-juice atomizer.
3. Access the filling hole by removing the lid of the e-liquid atomizer.
4. Load desired amount of e-liquid onto the coil. Note: Don’t put too much e-liquid in the atomizer chamber to avoid spillage.
5. Put the lid cover back. Note: Do not overtighten the threads to avoid any damage that will cause it to be loose altogether.
6. Install the magnetic adapter.
7. Place the e-liquid atomizer back to the battery.

Switching Through the Temperature Settings

1. Press the power button 5 times to turn the Yocan Hive 2.0 Vaporizer on.
2. Select your desired temperature settings by rapidly tapping the power button 3 times.
3. Release the power button to allow the selected heat setting to take effect on the Yocan Hive 2.0 Vaporizer.

Below are the corresponding heat levels.

• One Light: Low Setting
• Two Light: Medium Setting
• Three Light: High Setting

How to Vape the Yocan Hive 2.0 Vaporizer

1. Make sure that the Yocan Hive 2.0 Vaporizer is properly sterilized, fully charged, and is loaded with the right concentrates before vaping.
2. After loading your concentrates, take the mouthpiece and press your lips against it and prepare to draw.
3. Press and hold the power button to begin the heating function. Once the Yocan Hive 2.0 Vaporizer starts producing vapors, draw and pull from the mouthpiece of the chamber.
4. Repeat this process as necessary or until all concentrates are fully consumed.

Cleaning and Maintaining your Yocan Hive 2.0 Vaporizer

The Yocan Hive 2.0 Vaporizer is easy to clean and maintain. Likewise, it has very few parts which means that assembly and disassembly is fairly easy as well. To maintain your Yocan Hive 2.0 Vaporizer, follow the steps below.

1. Remove the wax concentrate atomizer chamber and the e-juice chamber from the battery.
2. Always check for damages and see if there is a broken atomizer parts that needs replacement.
3. Use a dry paper or towel to wipe off the vaporizer and the other parts.